prima pagina » produse » point source systems » Doppia II 5040 (A/P)

Doppia II 5040 (A/P)


  • Compact powerful (139dB peak SPL@ 1 m) enclosure for bi/tri-amping, with two 12" (LF) woofers in hybrid reflex / band-pass configuration, a 10" (MF) midrange and a driver compression 3" diaphragm (HF), both horn loaded; ferrofluid cooled HF section voice coil.
  • Modular system with interchangeable components for the utmost flexibility to satisfy various acoustic coverage requirements, can be installed with other units of the same type in array configuration.
  • Extremely linear phase response of within +/-50° from 400Hz to 20kHz
  • Biamping or triamping and control via dedicated digital processor.
  • Also available in "P" version with built-in crossover for biamping of the MF and HF sections, thus saving an amplifier compared with the triamplified "A" version.
  • Cabinet reinforced internally for the utmost sturdiness, eliminating coloration due to resonance and equipped with Outline's proprietary "Fast Hanger" system for fast reasonably priced flying.


  • Medium / short throw system. A few units are ideal for live use in no-nonsense applications in medium sized concerts, with groups, bands and orchestras.
  • Permanent high quality installations in theatres, clubs, indoor sports arenas, ideal for use with Outline subwoofers, for further extension of the bottom end and therefore greater dynamics.


Doppia II 5040 is a professional full range 3-way loudspeaker system, in version "A" for triamping or version "P" for biamping with built-in passive low-loss crossover for the mid / high frequency section. It comprises a low frequency section using two 12" loudspeakers in hybrid reflex / bandpass configuration, a mid frequency section with a high efficiency 10" loudspeaker, loaded by a symmetric waveguide with a square mouth, low compression ratio and low distortion and a high frequency section that uses a compression driver with a 2" throat and 3" titanium diaphragm, with overload protection, loaded by an asymmetric waveguide which also has a square mouth and can be turned through 90° on its axis inside the cabinet in order to change the horizontal /vertical dispersion.

The acoustic reproduced bandwidth is 61Hz÷19.7kHz at -10 dB, with a considerable linearity of within +/-3dB from 79Hz to 18.9kHz, for the reproduction of many types of applications. When triamped, the system has a high sensitivity such as over 102dBSPL at 1m for the low frequency section, 107dBSPL at 1m for the mid section 111dBSPL at 1m for the high section. Driven at maximum peak power each section is able to produce a maximum peak sound pressure of 134dBSPL (low), 138dBSPL (mid), and 139dBSPL at 1m (high).

The maximum allowed power for each section is 400 Watt AES (1.600 peak) for basses, 300 Watt AES (1.200 Peak) for midrange and 150 Watt AES (600 Peak) for high. Average dispersion from 500Hz to 4kHz is 80° horizontal and 70° vertical; from 500 Hz to 10.000 Hz is 70° horizontal and 60° vertical for medium throw applications.

The trapezoidal cabinet is built in high quality 15mm Baltic plywood, strengthened by the complex internal structure and suitably positioned internal bracing, to eliminate any resonance of the cabinet's sides. The black outer fi nish is in high quality scratch-resistant paint. The cabinet has 6 fast hanging points that makes vertical or horizontal hanging extremely easy and reliable, by using the appropriate optional accessories. The front of the enclosure has recessed sockets for fitting the optional trolley, for handling and protecting the fi breglass waveguide during transport. Six integral recessed handles ensure a positive grip during handling.


FREQUENCY RESPONSE (-10 dB) 61Hz - 19.7kHz
(±3 dB) 79Hz - 18.9kHz
AVERAGE DISPERSION >5 kHz 50° x 45° (HxV)
IMPEDANCE (Ω) Low (min): 8 Ω (8.5 @ 187Hz)
Mid (min): 8 Ω (8 @ 262Hz)
Hi (min): 16 Ω (10.8 @ 5560Hz)
MAX SENSITIVITY (dBSPL 1W 1m) Low: 105 (Half-space)
Mid: 107
Hi: 111.3
  400 1600
MAX OUTPUT LEVEL (calculated) Cont. Peak
Low 131 137 (Half-space)
Mid 132 138
Hi 133 139
CONNECTORS 2xNL8 Speakon in parallel
LF Pin 1+ pos ; Pin 1- neg
MF Pin 3+ pos ; Pin 3- neg
HF Pin 4+ pos ; Pin 4- neg
LF 2x12" Hybrid loading Vented Box
MF 1x10" Wave Guide loaded
HF 1x2" Exit (3" diaphragm), Wave Guide loaded
WEIGHT (Net / Gross) 55 / 62
DIMENSIONS Unit With packing
H x W x D 74 x 55 x 60 cm 82 x 63 x 67 cm